Crack Repair/Structure Crack/PU Injection/Malaysia Waterproofing Specialist Contractors

Project : Sang Lee Durian Farm, Bentong.

Due to the increased price of materials in constructions, quality of houses that are purchased in #Malaysia #KualaLumpur #Selangor tend to create problems such as cracks on concrete, water leakage & failure on electrical/plumbing etc. Concrete often cracks. It is inevitably recognized and experienced. Concrete construction requires construction joints and cold joints. All of these unwanted openings in concrete structures may cause very serious problems of water leakage.

Many homeowners with poured-in-place concrete foundations will find cracks in their basement,toilets/baths walls & roofing slab on closer inspection . Cracks are created by drying shrinkage, thermal movement, and other causes.
If minor, they will cause no immediate problems. But over time, minor cracks often grow larger and cause major headaches, including reduced structural integrity or water leakage.

By sealing smaller cracks itself, the homeowner can save hundreds and even thousands of ringgits. Even if a crack is not leaking now, eventually water might find a way through it. We supply polyurethane foams injection for all types of foundation crack repairs. Crack injection has been performed for many years. In many cases, crack injection will fix the problem.

Cracks on toilets/bath walls & roofing slab will cause major headaches to solve. For example, for toilets/baths, tiles/mosaic need to be hacked & cleaned, before applying new layer of flexible acrylic polymer cementitious waterproofing coating. Then, ponding test need to be carry on to check on leakage & tiles laying follows. These procedures will take precious hours or time, and costing thousands of ringgits.

So, how can we help you solve your problems with a minimal cost which save more than half of the costs using normal repairs, and only takes a day time ? Polyurethane (PU) foams injection system is your solution!!

How does PU foams injection system works ??

Firstly, we drills holes into one side of the cracks and on an angle so when the hole crosses through the cracks it does so in the centre of the wall. In order to inject the into the crack, it is necessary to install injection ports, also called mechanical packers. The depth of the drill hole intersecting the crack should be somewhere close to the center of structure, if possible.

Once packers are tighten, polyurethane foams will be mixed in a high pressure polyurethane foams injection pump, then polyurethane foams will be injected through the packers into the walls. Polyurethane foams will infill the cracks and pushes any existing waters in the cracks out. Once polyurethane foams infill the cracks, you can see it overflow out from the cracks. Polyurethane foams will dry in seconds. Leave it for an hour, before further inspection and leakage check will be done.

Advantages :
- Negative side application possible
- Deep penetration into very small cracks
- Foam increases in volume to fill cavities and voids
- Adjustable gel times
- Excellent bond to wet surfaces
- Underwater injection approved
- Good adhesive strength, tolerant of movement Inert after curing, constant volume, no shrinkage
- Does not create new cracks
- Non-toxic
- #Malaysia

So, what else are you waiting for ???
Like us on https://www.facebook.com/YCLwaterproofing
Call us @ 012-6891886 or whatsapp for FREE consultation on your problems !! Add us #Wechat YCLwaterproofing
Follow us in google+ https://plus.google.com/+YCLWaterproofingKajang/posts

Some of the symptoms of a possible slab leak include the sound of running water even though the water has been shut off, an unusual increase in your water bill, moist or warm spots on your floor or carpet. Cracks in the floors or walls can also indicate a serious foundation issue, and you should immediately call a waterproofing specialist who specializes in slab leak detection and repair. Determining the source of the leak can be slightly complicated, and ensuring that it is properly sealed is important to making sure that the leak is entirely fixed and the damage doesn¡¯t continue.A leaking pipe can drip thousands of gallons of water a month into the surrounding slab and soil. This water saturates the soil, causing it to swell and push on the foundation itself, eventually causing it to shift and buckle. This is what is causing the foundation to crack or even the wall of your house to crack if the foundation has shifted too much. Whether you suspect a minor leak or a major one, having your concrete slab checked by a professional waterproofing contractor #Malaysia #KualaLumpur #Selangor who specializes in slab leak detection and repair will ultimately save you time and money.These types of leaks can cause a large amount of damage if not repaired.